Rolling

Model 610

Rolling steel door model 610 is a perennial best-seller for good reason. The standard features exceed the norm for quality and a myriad of options allow for true customization. The Model 610 is built with a standard galvanized steel curtain, or an optional stainless steel or aluminum curtain.

The standard curtain slat is the attractive C-187 curved profile, with additional slat options available in curved and flat. Finishes range from four standard colors to approximately 200 powder coat colors or matched to your specification. A host of other options — including motor operation, pass doors, exhaust ports, between-jambs mounting, cylinder locks and special usage packages — allow the 610 to be adapted to any environment.

Options

Accessories

  • Electric operator (RHX®, RSX®, RMX®) or crank operation
  • Bottom sensing edge
  • Galvanized steel bottom bar angles and guides
  • Sloping bottom bar
  • Between-jambs mounting
  • Stainless steel or aluminum slats
  • High-usage package
  • High-wind load (FBC, TDI, DADE)
  • Cylinder lock
  • Exhaust ports
  • Flat slat profile (F-265)
  • C-600 heavy duty 6" curved slat profile
  • Perforated 18 ga. steel slats with 1/16" (2 mm) diameter holes on 1/16" (2 mm) centers
  • Fenestrated 18 ga. steel slats with uniformly spaced openings of 5/8" x 3" (16 mm x 76 mm) on C-275 or F265 slat profiles
  • Fenestrated 18 ga. steel slats with uniformly spaced openings of 1" x 10" (25.4 mm x 254 mm) on F265 slat profile
  • PowderGuard® Premium powder coat finish options are available in approximately 200 colors as well as custom matching to specification.
  • PowderGuard® Zinc and PowderGuard® Weathered finishes
  • Special application doors:
  • Oversized doors to 1500 sq. ft. (139.4 sq. m)
  • Combination doors with grilles and/or with full or partial standard, perforated or fenestrated slats
  • Spark-resistant doors, craneway doors, pass doors ​​

Colours

Actual door color may vary from the digital representation shown here.

Color samples are available by request.

Powder Coat Color Options

PowderGuard® Premium powder coat finish options are available in approximately 200 colors as well as custom matching to specification. PowderGuard® Textured finish, a thicker, more scratch resistant coat, is available in 11 colors providing enhanced scratch resistance as well as aiding in hiding the dirt and blemishes that often occur in commercial environments.

Features

STANDARD MAX WIDTH:

30'4" (9246 mm)

STANDARD MAX HEIGHT:

28'4" (8636 mm)

SLAT PROFILE:

C-187, C-275, F-265, F-265E, C-600

STANDARD MOUNTING:

Face of wall

FINISH:

Gray, tan, white or brown

HOOD:

24 ga. galvanized steel

WIND LOAD:

20 psf

GUIDES:

Three structural steel angles PowderGuard® weathered finish with black powder coat

LOCK:

Interior slide bolt on push-up
Padlockable chain keeper on chain hoist

BOTTOM BAR:

Extruded aluminum with weatherseal up to 15'4" (4674 mm)
Back-to-back steel angles with weatherseal more than 15'4" (>4674 mm)

WEATHERSEALS:

Bottom bar astragal

WARRANTY:

24-month limited on door
3 year/20,000 cycles limited on door & operator system (when purchased together)

CURTAIN:

16 ga. galvanized steel up to 30'4" (9246 mm) width (F-265 only)
18 ga. galvanized steel up to 30'4" (9246 mm) width*
20 ga. galvanized steel up to 25'4" (7722 mm) width*
22 ga. galvanized steel up to 18'4" (5588 mm) width*
24 ga. galvanized steel up to 15'4" (4674 mm) width*
 * not all slat profiles

OPERATION:

Manual push-up up to 84 sq. ft. (7804 sq.mm) or 12' x 7' (3658 mm x 2134 mm)
Chain hoist over 84 sq. ft. (7804 sq.mm) or 12' x 7' (3658 mm x 2134 mm)

Mounting

HomeProductsGalleryContact(905) 266 1632